Do-it-yourself plumbing wiring and installation: general provisions and useful tips Repair of a bathroom or toilet room is often associated with the replacement of plumbing equipment and pipes. This procedure is very responsible and somewhat complicated. However, you should not rush and call a plumber: it is quite possible to perform the wiring and install the selected equipment correctly with your own hands. Simultaneously, a certain amount will be saved, which will not be superfluous for the family budget. However, in order for the result of the work to be only pleasing, you should get acquainted with the plumbing work stages.
The first steps involve preparing the installation site, tools, materials, and performing accurate mathematical calculations.
The required set of tools includes:
- scissors for the pipe cutting process;
- welding soldering iron;
- adjustable wrenches;
- Marker (for marking)
We select the pipeline installation method. Pipe laying can be carried out in a closed or open way. Both of these schemes are, in principle, equally reliable. They differ in the features of operation and maintenance. Free installation involves installing pipes over walls or floors. If desired, they can be hidden with various decorative designs. The main advantage is the easy accessibility of communications. If you need to connect new elements, service, or repair, you will not need to destroy the decorative coating that hides the pipes. Also, the slightest leakage or other problem will immediately become obvious and promptly eliminated. With concealed installation, pipes are mounted directly into the wall, which is certainly more aesthetically pleasing. However, the maintenance and repair of communications are challenging. As well as inspecting parts for leaks or other problems. In case of hidden installation, it is advisable to install sensors that will report a water leak. In any case, to gain access to the pipeline, you will have to open the wall, which is the most significant disadvantage of this type of installation.
Installation of plumbing equipment and other components of the system
Before installing the pipes, the locations of their location should be prepared as much as possible( This information we got from our partner cjplumbingchicago.com). You will need scissors for the installation process for cutting them, a tape measure, and a welding soldering iron. It is recommended to free up space from unnecessary elements. Rubber gaskets must be installed in docking places. Their absence will lead to leaks. When installing, it should be noted that the pipes’ slope about the main riser from the equipment should be within 3 cm per 1 m of pipe. In cases where a tee system is used, stainless valves are required at each new branch.